18.6.19

Lush Lilacs & Oakberry Blossoms Card - Simply Cards #126



Materials

HCD17200 Oakberry Lane Blossoms Die
HCPC3842 Oakberry Lane Blossoms Cling Stamp Set  
HCDP1287 Lush Lilac Paper Collection
HCD17170 Lush Lilac Die
HCPC3816 Lush Lilac Cling Stamp Set
HCFB1466 3D Lush Lilac Shaping Mold
HCFB1469 3D Blossoms Shaping Mold
HCD17155 Circle Basics Large Die
HCD17154 Eyelet Circle & Basics Small Die
HCS1460 Bridal Bouquet Stamens
HCST1401 Deluxe Flower Shaping Kit
FB13 6 1/8” x 6 1/8” Clear Boxes
159723 Designer Dries Clear Adhesive
3d Adhesive
White Cardstock
Purple Sheer Ribbon
Ranger Liquid Pearls Opal
Nuvo Gloss pen
Brilliance Pearlescent Lavender Ink
Distress Inks Peeled Paint
Versafine Smokey Grey
Mini Mister
Bone Folder
Die Cutting Machine

Video Tutorial –

Instructions
  1. Using your Oakberry Lane Blossoms stamp set, stamp a mixture of sizes using Versafine Smokey Grey Ink. Colour with Brilliance Pearlescent Lavender ink. Using a die cutting machine of choice, cut with coordinating dies. Highlight the edge of the flowers using the same ink. Spray with a mini mister and shape in your 3d shaping mold. Adhere 3 of each flower together for the large flower. Adhere 2 of each size flower together for the other 2 sizes and allow to dry.  In the centre adhere 2 stamens in the small, 3 stamens in the medium and 4 stamens in the large.
  2. Using your Lush Lilac Cling stamp set, stamp 4 flourishes using Versafine Smokey Grey ink and colour with the Pearlescent Lavender on the flowers and the Peeled Paint on the leaves. Die cut with coordinating die and shape using your Deluxe Flower Shaping kit.
  3. Stamp your leaves using Versafine Smokey Grey ink. Colour with Distress Peeled Paint ink. Die cut with coordinating dies and highlight edges with the same ink. Spray with a mini mister and shape in your 3d shaping mold.
  4. Using the bulk lilac flowers page from your Lush Lilac Paper Pad die cut one lot of purple lilacs using the coordinating die. Spray with a mini mister and shape in the 3d shaping mold. Adhere single stamens to the lilac centres.
  5. Using white cardstock cut 1 eyelet circle from the Eyelet Circle & Basics Small Die Set.
  6. Using white cardstock cut your card base 30.5 cm x 15.25 cm. Fold in half and use a bone folder for a cleaner line.
  7. Using your Lush Lilac paper pad cut your selected main patterned mat 14.75 cm x 14.75 cm. Using the largest circle from the Circle Basics Large die set die cut the circle from the centre. Adhere the outline to your card front. Using 3d adhesive adhere the patterned circle to the white eyelet circle and using 3d adhesive again adhere to the card front.  Using the selected paper cut your 2 inserts and 1 rear mat 15 cm x 15 cm and adhere the insert and rear mats.

  8. Adhere 1 large and 2 medium flowers to the bottom right side of your card and adhere your leaves around the flowers as desired. Adhere one flourish to the bottom left of your flowers and one flourish to the top right of your flowers. Adhere lilacs as desired to fill any gaps.
  9. Adhere 1 flourish up and one flourish down in the top left corner, adhere your sentiment strip of choice from your paper pad. Adhere 2 small blossoms as pictured and fill in the gaps with the lilacs.
  10. Decorate with Nuvo gloss glitter pen as desired and apply Opal Liquid Pearls to the flowers on the patterned mats. You can also use the glitter pen to highlight the images on the inserts of your card.
  11. It is nice to make a coordinating envelope. I have used the clear boxes from Heartfelt Creations. Using the same sentiment make a little flower bunch to copy the main section of the card, tie a bow around your envelope and line up the sentiment to match the card sentiment on the inside of the box.













Happy Crafting Tracy C x x









10.4.19

Sugarspun Popcorn Treat Box

On the Heartfelt Creations blog today is the NEW!! Sugarspun collection. Hope you enjoy my Popcorn Treat box. 


Heartfelt Creations Products Used

HCD17237 Sweet Shoppe Die
HCPC3873 Sweet Shoppe cling Stamp Set
HCPC3843 Special Birthday Sentiments Cling Stamp Set
HCD17203 Ornamental Tags Die

159723 Designer Dries Clear Adhesive

DDOTS 3D dots
TSMP808 Memento Espresso Truffle
RACP524 Archival Vibrant Fuchsia
HCDA1449 Stack and Store Daubers
Other products used

White cardstock
Glossy Accents
Copic Markers BG000,RV02,RV04,Y04
Acetate
Copic Xpress Blending card
Pink grosgrain ribbon
Instructions

Using your Sweet Shoppe stamp set, stamp your shoppe and wheels twice using your Espresso Truffle ink on copic blending card. Stamp the shoppe 2 more times to cut out extra trims. Die cut your shoppes out using the coordinating die. Trim of the two roof sections and using the scallop trim die cut 2 trims. You will end up with 2 full shoppes, 2 roof trims, 2 scallop trims and 2 wheels.



Using the shoppe die cut our 2 plain die cuts, you will adhere these to the back of the stamped images to strengthen your treat box.
Color you stamped images using copics. Roof trim stripes BG000, RV02, edge roof trim in RV04, shoppe base BG000, shoppe trim Y04 and edged in RV04, shoppe handles and feet RV02, wheel trim RV04, wheel inner RV02, heart BG000,outer heart RV02, trim around the heart RV04. 


Using your Special Birthday Sentiment Stamp set, stamp your "happy birthday" using espresso truffle, did cut with tag die from your ornamental tag die set. Ink the edge using your archival fuchsia ink.


Cut your inner treat box - Trim your white cardstock to 10 1/2" x 3", using a score pal score the long edge in 1/4" on the left and the right. Now score at the 4" ink mark on the left and the 4" mark on the right, this will leave you 2 1/2" in the middle. Place a small cut line where your score marks over lap and fold in to make a U shape, when dry cut 2 acetate mats 4" x 2 1/2" and glue on the insides of your white base to create the inner box of your treat box. 

Glue your shoppe image to the front of the box, you will get a slightly larger frame on the inner box. Do the same with the back of the box. The front and back will be facing opposite directions, this is ok it will make the box stand up better. 

Using 3d dots adhere your striped roof, scalloped trim and wheels. Using 3d dots adhere you sentiment in the bottom left corner. Fill a clear cello bag with popcorn or treats of your choice, tie a matching ribbon around top so the bow lines up with the top of your treat box. Apply glossy accent to the trims - roof, scalloped trim and the wheels. Hope you enjoyed my treat box.

Happy crafting x





4.4.19

Cherry Blossom Wishing Well Treat Box


New on the Heartfelt Blog today. My Cherry Blossom Wishing Well treat Box. 




Heartfelt Creations Products Used

HCD17230 Tweet Cherry Blossom Die
HCPC3866 Tweet Cherry Blossom Cling Stamp Set
HCD17233 Wishing Well Oasis Die
HCPC3868 Wishing Well Oasis Cling Stamp Set

HCFB1474 3D Cherry Blossom Shaping Mold
HCDP12100 Cherry Blossom Retreat Paper Collection
159723 Designer Dries Clear Adhesive
HCDA1449 Stack and Store Daubers
HCST1401 Deluxe Flower Shaping kit
DDOTS 3D Foam Dots
TSMP707 Memento Bamboo Leaves
71015 Colorbox Rouge


Other products used

Versafine Smokey Gray
Gingham Ribbon

Stickles Diamond
White cardstock
Glossy Accents

Copic R20,R22,G21,G24,C00,C1,C2,C3,E33.


Instructions

Using your Rouge ink stamp your small Cherry Blossoms, as it is pigment ink heat set or set aside to dry before cutting with coordinating die. Stamp your leaves using Bamboo Leaves ink and color with the same ink, cut with coordinating die. Highlight with same ink. Lightly mist with water and shape in your 3D Cherry Blossom Shaping Mold. 

Stamp your wishing well using Versafine Smokey Gray ink. Die cut with coordinating Die. Die cut 1 outline with the same die. Color your stamped image using copic or markers or pencils of choice. Cherry Blossoms R20, R22. Leaves G21,G24. Highlight Roof C00. Well/bucket combination of C00,C1,C2,C3. Rope E33.
Cut 1 white strip 3/4" x 3". Adhere gingham ribbon along the strip. Cut your box mat 3" x 4" and place a bone fold line at 1" around each side. Fold along the lines. Cut a slit in each corner. Apply a little glue and fold the box together. 


Adhere the wishing wells to the front and back of your box. 

Adhere your handle to the front first and use a paper clip to hold in place, when dry repeat with the other side. 


Adhere 2 Cherry Blossoms/leaves to the top and 2 to the bottom. Decorate with stickles as desired. Highlight the stones and the water and the water inside the bucket with glossy accents. Tie a white bow and use a thin strip of the gingham ribbon to tie around the center section of your bow. Adhere to the top of your handle. Hope you enjoyed my project. 

Happy Crafting..












27.3.19

Cherry Blossom Birdhouse Card



New on the Heartfelt Creations blog today. The Cherry Blossom Retreat Wednesday inspiration. Hope you enjoy my card.



Heartfelt Creations Products Used

HCD17230 Tweet Cherry Blossom Die
HCPC3866 Tweet Cherry Blossom Cling Stamp Set
HCD17231 Cherry Blossom Retreat Die
HCFB1474 3D Cherry Blossom Shaping Mold
HCDP12100 Cherry Blossom Retreat Paper Collection
HCD17228 Lacy Diamond Die
HCD17155 Eyelet Basics Large
159723 Designer Dries Clear Adhesive
HCDA1449 Stack and Store Daubers
HCST1401 Deluxe Flower Shaping Kit
DDOTS 3D Foam Dots
TSMP707 Memento Bamboo Leaves
71015 Colorbox Rouge


Other products used

Gingham Ribbon
Stickles Diamond
White cardstock

Instructions

Using your Cherry Blossom stamps, stamp your small and medium blossoms using the Rouge ink, as this is pigment ink, allow to dry and then cut with coordinating dies. Stamp the 2 leaf sprays 3 times using Bamboo leaves ink. Color with same ink and die cut with coordinating die. Lightly spray your blossoms and leaves and shape in the matching 3D shaping mold. Highlight the edges of your leaves using the Bamboo Leaves ink.

Using white cardstock cut one lacy diamond die. Cut your white cardstock 12" x 6" and fold in half. Cut one white mat 4 1/2" x 4 1/2".

Using your Cherry Blossom Paper Collection. Cut your check cardstock into 4 mats 5 3/4" x 5 3/4". To get the front birdhouse strip you will need to use 2 of the same card stock. Cut the birdhouse trim 5 3/4" x 2 1/2". Using your circle die cut the center birdhouse from one of the strips. 

Using the die cut sheet from your paper collection, cut one birdhouse.

Card Assembly - Adhere your check mats to all four sides of your card. Adhere you white insert mat to the right hand side. Using your glue adhere your birdhouse in the top left corner of your insert mat. 


Cut your Lacy Diamond Die in half. Using glue along the long edge adhere your die cut mat evenly to the top and bottom of your card front. Using 3D adhesive adhere your center strip. Using double 3D adhesive adhere your circle birdhouse. 











Using 3D adhesive adhere your other birdhouse strip to the back of your card making sure it lines up with the front strip. Adhere your bow to the top center of your card front. Adhere 1 leaf and 1 medium flower to the center of the bow. Adhere 1 medium and 2 small blossoms to the bottom of the birdhouse and 1 leaf spray to each side. Decorate with stickles or glitter of choice as desired.


Happy Crafting x

13.3.19

Cherry Blossom Retreat

New on the Heartfelt Creations Blog today the stunning 
Cherry Blossom Retreat Collection. See the full collection here! 


Heartfelt Creations Products Used

HCD17230 Tweet Cherry Blossom Die
HCD17231 Cherry Blossom Retreat Die
HCPC3866 Tweet Cherry Blossom Cling Stamp Set
HCPC3867 Cherry Blossom Retreat Cling Stamp Set
HCDP12100 Cherry Blossom Retreat Paper Collection
HCFB1474 3D Cherry Blossom Shaping Mold
HCD17229 Diamonds & Lace Die
HCD2750 Cut Mat Create 1B
TSMP707 Memento Bamboo Leaves
71015 Colorbox Rouge
159723 Designer Dries Clear Adhesive
HCST1401 Deluxe Flower Shaping Kit
DDOTS 3D Foam Dots
HCDA1449 Stack and Store Daubers


Other products used

White cardstock
Diamond Stickles
Distress Ink Antique Linen
Instructions

Using your Tweet Cherry Blossoms stamps, stamp 1 of each size using the Rouge ink, this is pigment ink so let it dry before cutting with the coordinating die. Spray lightly with mister and shape in your 3D Cherry Blossom shaping mold.

Using your Cherry Blossom Retreat stamps, stamp 1 of each leaf spray
using the Bamboo Leaves ink. Color with the same ink. Cut with coordinating dies. Highlight the edges a little darker with the same ink. Shape with your Deluxe Shaping Tool Kit.

Using your Cherry Blossom Retreat stamps, stamp the sentiment banner, color lightly with the Antique Linen ink and cut with coordinating die.
Cut your white cardstock 12" x 6". Score on the 3" mark on the left and right hand sides to create a gate fold card.


Using white cardstock cut your decorative diamond & lace mat.Using your Cherry Blossom Retreat Paper Pad, cut your front wishing well using the mat using a Cut Mat Create Die. Using 3d dots adhere together.





Trim the borders from the cardstock until you are left with the two square front panels, trim down further to measure 5 3/4" wide, turn over so you are using the check side. Trim a mat 2 3/4" from the left and repeat from the right.




Card assembly - Adhere your insert mat. Adhere your front left and right mats so that the curved flowers are to the top. Using 3d dots adhere your Diamond & Lace mat to the left hand side of your card front only. Line it up so it sits in the center of your card when closed. Adhere one leaf spray to the left and one to the right of your main front mats and adhere in place with a little glue in a few areas so as to hold firmly in place. Using 3d dots adhere your sentiment. Add a dot of glue at the top of the chain to hold in place. Adhere you flowers as desired or as pictured. Decorate with stickles or glitter of choice. 

Happy crafting x






28.2.19

Burst of Spring Card

New inspiration on the Heartfelt Creations blog today. Hope you enjoy my Burst of Spring Card.




Heartfelt Creations products used

HCD17222 Cheery Pansy die
HCPC3862 Cheery Pansy Cling Stamp Set
HCD17223 Burst of Spring Die
HCPC3863 Burst of Spring Cling Stamp Set

HCD17225 Petite Pansy Frame Die
HCPC3865 Petite Pansy Spray Cling Stamp 
HCDP1299 Burst of spring Paper Collection
HCFB147 3D Pansy Shaping Mold
HCD17229 Diamonds & Lace Die
TSMP707 Memento Bamboo Leaves
TSMP506 Memento Sweet Plum
71077 Colorbox Plumeria
159723 Designer Dries Clear Adhesive
HCST1401 Deluxe Flower Shaping Kit
HCA1449 Stack and Store Daubers
RAP632 Archival Buttercup
ANC818 Go Man Go Prills
DDOTS 3D Dots

Other products used

White cardstock
Nuvo Glitter Accents
Brilliance Pearlescent Lavender
Versafine Smokey Gray 

Instructions

Using your Sweet Plum ink stamp 3 medium, 1 large and 1 small pansies. Color the centers in Buttercup ink and then the remainder in the Lavender ink. Die cut with coordinating dies. Lightly mist and shape in your 3D Pansy mold. Highlight the edges with the Plumeria Ink.

Using your Bamboo leaves ink, stamp 4 small and 1 large leaves and color with the same ink and cut with coordinating dies. Lightly mist and shape in the 3D Pansy mold. Highlight the edges with the same ink.

Using Smokey Gray ink, stamp your Petite Pansy Frame and your Burst of spring Flower Spray. Color the leaves with the Bamboo ink and the flowers with the Lavender ink. Cut with coordinating dies. Highlight the frame with the Nuvo Glitter Accents and allow to dry fully.
Using white cardstock cut 1 lattice center from your Diamond and Lace Die set. 

Using white cardstock, cut your card base 11 1/4" x 6 1/4". You are going to put in a binder edge, so bone fold at the 5 1/4" mark and then again 1/2" and this will leave the next panel 5 1/4" wide. When folded give you a binder edge which will allow you to add dimensional flowers on the inside of your card also.


Using your paper collection, cut your mats 1 front, 2 inserts, 1 back) 5"wide x 6 " tall. Cut out the "especially for you" and the "sending love your way" sentiments.



Card assembly - Adhere your insert mats. On the left insert panel adhere your Pansy Flower Spray, adhere 1 large leaf and 1 large pansy, using 3d dots adhere your "sending love your way" sentiment. On the right insert panel adhere 1 small leaf and 1 small pansy.
Adhere your front and rear mats. Adhere your lattice center. Adhere your pansy frame. Adhere your leaves and pansies over the stamped pansies. Using 3d dots adhere your sentiment. To finish off add prills to your flower centers.



Happy crafting x